 |
NCL SHREDDER |
|
|
NCL PERFO-BINDER |
|
|
NCL NOTE COUNTER |
|
| |
| |
| |
| |
| |
| |
| |
| |
|
|
NCL-108
| SPEEDY |
SIMPLY |
Speedy binding |
Simple operation anyone can do |
| From perforating to binding requires only 30 seconds. This means less time is lost collating documents and records by hand. |
Just press the START button. Perforating to binding is thereafter fully automatic till your document is ready. A new switch has been added to accurately position holes, so your documents can be used more effectively when bound. |
| STRONGLY |
FLEXIBLY |
No worries over missing pages - Strong binding |
No need to be size-selective when compiling documents |
| Binding is performed by molding plastic tube under heat and pressure. So strong is the binding that pages never go missing. Bound documents can last over 10 years. |
If its paper, any size will do, even A2 formats used in drawings and blueprints. Maximum perforating thickness is 50 mm. Thickness adjustment is not necessary when accommodating documents. |
| ECONOMICALLY |
User-friendly Design
The NCL-108 notifies you when it is out of tube, or when the drill is dull or in the event of trouble. An indicator on the illustrated operation panel lights up to help quickly identify the point. |
|
|
One machine, two jobs |
| Through designed for complete document collating from perforating to binding, the NCL-108 can also be used for perforating only. |
|
|
| Note: Use NCL tubes for best performance. (6mm plastic tube) |
|
|
|
|
|
Specifications |
Accessories |
| Binding capacity |
: |
1~50 mm thickness |
| Binding speed |
: |
50Hz:Approx.29sec
60Hz:Approx.27.5sec |
| Drive system |
: |
100W, 23W, 14W condenser motors(x3) |
| |
|
2.5W synchronous motor |
| Heating system |
: |
240V/150W or 120V/120W heaters (x2) |
| Binding method |
: |
Plastic tube heat compression molding |
| Power supply |
: |
110/115, 220/240V, 50/60Hz |
| Power consumption |
: |
Max.700W Min.10W |
| Weight |
: |
38kg |
|
| Drill grinder |
Nippers
(For cutting tube) |
Tweezers
(For removing tube and scrap paper) |
T-shaped drill key
(For changing drill) |
L-shaped pick
(For replacing rubber coin) |
50cm tube x 10
|
|
|
There are many kinds of documents in the office ; Account documents, Conference record documents, tax matters documents, and so on. Such documents are required to stock for a long period in a stable situation.
NCL-108 will carry it out
speedy, simply, strongly, flexibly, silently, easily and economically.
- 30 seconds binding one push all covered
- Binding size 5cm (dictionary size)
- 1 machine 2 works (perforating and binding)
|
| Optional Tools |
 |
NBP-1N |
| PLASTIC TUBE |
Volume: |
50pcs/box |
Size: |
6mm x 1m |
|
 |
NBP-2N |
| RUBBER COIN |
Volume: |
15 pcs/box |
|
 |
NBP-3N |
| DRILL |
Volume: |
5 pcs/box |
Drill diameter: |
7 mm |
|
 |
NBP-11 |
| CONNECTOR |
Joint Screw |
Volume: |
50 pcs/box |
|
 |
NBP-40 |
| ADHESIVE SPINE TAPE |
TUCK SEAL |
NBP-40-1 |
Contents: |
200 pcs/box |
Size: |
105 x 135mm |
NBP-40-2 |
Contents: |
200 pcs/box |
Size: |
280 x 135mm |
|
 |
NBP-90 |
| TUBE REMOVER |
Cut size (D): |
5~70mm |
Weight: |
2kg |
Size: W100xD265xH184 |
|
 |
ND-11 |
| WAGON TABLE |
Contains storage space for accessories and supplies. |
| Size(D):W450xD550xH690 |
|
 |
NBP-15 |
| SIDE GUIDE |
Convenient for repeated perforating in the same position. Magnetic |
|
 |
NBP-71 |
| EXTENSION TABLE |
Increase table length 10cm in depth |
|
|
|
NB-200
New Designed Perforating and Binding Machine
Operation More Simply |
- The NB-200 can make jobs. One is documents binding through from perforating to binding. Another is perforating only.
|
 |
- Binding is performed by molding plastic tube under heat and pressure. So strong is the binding that pages never go missing. Bound documents can last over 10 years.
|
|
Rubber Coin Automatic Revolving cuts off the shifting job. |
 |
|
New Tube Ejection Remained tube is ejected to left side cup. |
|
Automatic Heater-Off saves electric consumption. |
|
Drill guard added on Safety Guard for more safety |
|
Two boxes for tools and expendable supplies for user convenience. |
 |
Tube |
| Specially selected material to assure strong binding everytime. |
| Operation panel |
| New design. Easier hole positioning, and illustrated panel prompt user intervention if trouble occurs. |
| Dust Box |
| Keeps the office clean by collecting dust produced from perforating. |
Specifications |
Accessories |
| Binding capacity |
: |
1~50 mm thickness |
| Binding speed |
: |
50Hz:Approx.29sec
60Hz:Approx.27.5sec |
| Binding methods |
: |
Plastic tube heat compression molding |
| Power supply |
: |
110/115, 220/240V, 50/60Hz |
| Power consumption |
: |
Max.700W Min.10W |
| Weight |
: |
40kg |
| Dimensions |
: |
W440xD426.5xH662mm |
| |
|
|
| |
|
|
|
| Drill grinder |
Nippers
(For cutting tube) |
Tweezers
(For removing tube and scrap paper) |
T-shaped drill key
(For changing drill) |
L-shaped pick
(For replacing rubber coin) |
50cm tube x 10
|
|
| Options |
|
ND-11 |
| WAGON TABLE |
Contains storage space for accessories and supplies. |
| Size(D):W450xD550xH690 |
|
|
NBP-15 |
| SIDE GUIDE |
Convenient for repeated perforating in the same position. Magnetic |
|
|
NBP-90 |
| TUBE REMOVER |
Cut size (D): |
5~70mm |
Weight: |
2kg |
Size: W100xD265xH184 |
|
|
NBP-71 |
| EXTENSION TABLE |
Increase table length 10cm in depth |
|
|
BACK
Page Up